STX LED Beacons and Enclosed Isolation Equipment

NOW AVAILABLE

Two very different products for two very different situations – one to grab attention, one to make sure no one gets hurt. Both are manufactured by Switchtec and are available from G2 now.

STX LED Beacons Continuous and Flashing

When a beacon needs to do its job, it needs to be visible, reliable, and straightforward to install. The STX LED Beacon covers all three requirements.

Available in five colours: red, amber, green, blue, and clear, the STX range is weatherproof to IP65 with ultra-bright LED output and 180° visibility. Both continuous and flashing outputs are configurable via three wires, so setup is clean and quick.

Two voltage options are available: 12-24VAC/DC and 110-240VAC, making the range suitable for a wide variety of site applications. There are also two mounting options: a panel mount via M4 studs, or surface mount using the two-piece fixing plate.

Specifications at a glance:

• Available in red, amber, green, blue, and clear
• IP65 weatherproof rating
• Ultra-bright LED, 1Hz flash frequency (60 per minute)
• 180° visibility
• Continuous and flashing outputs configurable via 3 wires
• RoHS compliant, CE marked
• 12-24VAC/DC variants: 90mA current draw
• 110-240VAC variants: 120mA current draw
• Panel mount (2 x M4 studs) or surface mount (2-piece fixing plate)
• Operating temperature: -20°C to +55°C
• Weight: 135g

To maintain the IP65 rating, the sponge gasket should be used during installation.

Enclosed Isolation Equipment

Switchtec’s enclosed isolation range gives you the build quality and certification to do it properly across three product types, covering the most common requirements on site.

All three carry Bureau Veritas and KEMA certification, are CE approved, and conform to IEC 60947-1 & 3. The enclosures are IP65 RAL 7035 throughout, with a consistent set of safety features across the range.

NTE Enclosed Load Break Switches – 63A to 1250A

For high-integrity isolation across a wide amp range. 11 sizes available from 63A to 1250A, with enclosure dimensions stepping up accordingly. The 63A and 80A units start at 400 x 300 x 150mm; the 1000A and 1250A units top out at 1000 x 800 x 300mm.

NTF Enclosed Switch Fuses – 32A to 800A

The same quality build, with fuse protection. 9 sizes from 32A to 800A. (Supplied without fuses.) NTC Enclosed Changeover Switches – 63A to 1000A.

For switching between two power sources without risk. 10 sizes from 63A to 1000A.

Across the full range, standard features include:

• IP65 RAL 7035 enclosure
• 3 pole and switched neutral (4th pole)
• Pad lockable in the off position – accepts three pad locks
• Defeatable door interlocked handle
• Conforms to IEC 60947-1 & 3
• Removable top and bottom gland plates
• Door earth lead fitted as standard
• Bureau Veritas, KEMA certified and CE approved
• IP20 terminal protection included

About Switchtec

Switchtec has been supplying electromechanical, electrical, and electronic components for over 40 years. As a UK franchisee for world-class manufacturers, they carry more than 7,000 product lines ex-stock, ready for immediate dispatch. All products are supplied to ISO 9001:2015 quality standards.

G2 Electrical Wholesale is here to help you find the right product for your budget.

SUPPORT LOCAL. BUY LOCAL. TRUST LOCAL. Call 01543 273840.